Limos give off an air of elegance, sophistication, and wealth. They are often the vehicle of choice for celebrities and special occasions. You may have thought, as most people do, that limos were strictly made as limos and that there are only specific types of these automobiles. This, however, is false. Any type of car can be transformed into a limousine; but it may cost you quite a bit of money. The steps to converting your car into a limo are outlined in this article.
The first step in this process is to strip the interior of your car. This will include the seats, flooring, seatbelts, and basically anything else that is flammable. You should also cover the remaining parts of the car with flame resistant paper. You will then need to mount the car onto an elevated rail, making sure that the front end and the back end of the car are aligned properly. It is important to remember that safety is essential and that this is a dangerous process.
Next, you will slice the car in half. I know this sounds pretty crude and sloppy but if you use laser-guided machinery, there will be no mistakes and you will be left with a clean, precise cut. After you do this, you will have two halves of your old car that is ready for stretching! Now, you must weld a base onto the front and back halves of the car. This base should extend the full length of however long you wish your new limo to be.
It is necessary to put temporary braces on the frame of your car to keep it from twisting. After the base has been added and the braces are on, you must extend the drive line from the engine to reach the rear axle. You can do this through the addition of multiple drive lines that connect in order to reach the rear axle. The original electrical components must also be extended to this new wiring through the use of connecters.
The final steps involve fixing the disjointed body of the car. Pillar posts must be installed in the location of the new doors. After this, the floor of the limo is installed. This will cover up the framework and the drive line. It is very important to reinforce the brakes, suspension, and steering of your car in order to compensate for the added mass. The exterior of the car is then added to match your taste as with the inside. Now you are free to enjoy your new personalized limousine!
Just in case you are not successful in making your car a limo, you can call our limo Charleston SC and we'll take care of you!
Article Source: http://EzineArticles.com/7464526
No comments:
Post a Comment